Bring the Behringer Grind into a clearer and more immediate working position with the Studio Solutions S30 desktop stand.
The fixed 30-degree angle raises the complete Grind interface towards the user, improving visibility and access across its digital sound-engine controls, analogue filter, modulation section, sequencer and patch bay.
This position is ideal for hands-on sound design, patch creation, sequence programming and live electronic music performance. It provides a significant improvement over operating the Grind completely flat while remaining lower and easier to integrate than a steep 45-degree stand.
The Behringer Grind measures approximately 320.5mm wide and 165.6mm from front to rear.
The S30 provides approximately 170 mm along each angled equipment support, allowing the Grind chassis to sit fully within the support length with approximately 4 mm to spare.
At 200mm wide, the stand supports the central area of the Grind while remaining compact and visually unobtrusive beneath the wider synthesizer.
The connected open-frame construction leaves useful space beneath and behind the instrument for ventilation and cable routing. Power, audio, MIDI, USB and patch connections remain accessible while the Grind stays installed and ready to use.
Raised front retaining lips help prevent the synthesizer moving forwards during patching, sequencing or control changes.
Rubber feet beneath the stand protect the desktop and help prevent the frame moving. Anti-slip equipment contact spots are also fitted as standard across our open-format stand range.
ALSO COMPATIBLE WITH CRAVE, EDGE AND SPICE
The Behringer Crave, Edge and Spice use essentially the same compact desktop chassis footprint as the Grind.
Their approximately 164mm chassis depth also sits fully within the S30’s approximately 170 mm equipment supports.
This makes the stand suitable for:
Behringer Grind
Behringer Crave
Behringer Edge
Behringer Spice
The product photographs and primary listing title specifically feature the Behringer Grind.
FEATURES
Designed and photographed for the Behringer Grind
Fixed 30-degree operating angle
200mm overall stand width
approximately 170 mm angled support length
Improves access to the Grind patch bay
Makes sequencer and sound controls easier to see
Suitable for active sound design and performance
Also compatible with Crave, Edge and Spice
Open construction maintains rear connection access
Raised front retaining lips
Rubber desk feet fitted as standard
Anti-slip equipment contact spots fitted as standard
No permanent modification to the synthesizer required
Compact desktop footprint
Designed and manufactured in the UK
Developed and tested in our own working electronic music studio
Black finish
WHY 30 DEGREES?
The 30-degree angle provides a strong hands-on working position without making the Grind excessively upright.
It places the complete panel within a clearer line of sight while keeping the knobs, sequencer buttons and patch points comfortable to reach.
This position works particularly well when the Grind is placed behind another desktop instrument, MIDI controller or computer keyboard.
PLEASE NOTE
This listing is for the stand only.
The Behringer Grind, Crave, Edge or Spice synthesizer, power supply, patch cables, audio cables and other equipment shown or referred to are not included.
The stand has a fixed 30-degree angle and is not adjustable.
Bring the Behringer Grind into a clearer and more immediate working position with the Studio Solutions S30 desktop stand.
The fixed 30-degree angle raises the complete Grind interface towards the user, improving visibility and access across its digital sound-engine controls, analogue filter, modulation section, sequencer and patch bay.
This position is ideal for hands-on sound design, patch creation, sequence programming and live electronic music performance. It provides a significant improvement over operating the Grind completely flat while remaining lower and easier to integrate than a steep 45-degree stand.
The Behringer Grind measures approximately 320.5mm wide and 165.6mm from front to rear.
The S30 provides approximately 170 mm along each angled equipment support, allowing the Grind chassis to sit fully within the support length with approximately 4 mm to spare.
At 200mm wide, the stand supports the central area of the Grind while remaining compact and visually unobtrusive beneath the wider synthesizer.
The connected open-frame construction leaves useful space beneath and behind the instrument for ventilation and cable routing. Power, audio, MIDI, USB and patch connections remain accessible while the Grind stays installed and ready to use.
Raised front retaining lips help prevent the synthesizer moving forwards during patching, sequencing or control changes.
Rubber feet beneath the stand protect the desktop and help prevent the frame moving. Anti-slip equipment contact spots are also fitted as standard across our open-format stand range.
ALSO COMPATIBLE WITH CRAVE, EDGE AND SPICE
The Behringer Crave, Edge and Spice use essentially the same compact desktop chassis footprint as the Grind.
Their approximately 164mm chassis depth also sits fully within the S30’s approximately 170 mm equipment supports.
This makes the stand suitable for:
Behringer Grind
Behringer Crave
Behringer Edge
Behringer Spice
The product photographs and primary listing title specifically feature the Behringer Grind.
FEATURES
Designed and photographed for the Behringer Grind
Fixed 30-degree operating angle
200mm overall stand width
approximately 170 mm angled support length
Improves access to the Grind patch bay
Makes sequencer and sound controls easier to see
Suitable for active sound design and performance
Also compatible with Crave, Edge and Spice
Open construction maintains rear connection access
Raised front retaining lips
Rubber desk feet fitted as standard
Anti-slip equipment contact spots fitted as standard
No permanent modification to the synthesizer required
Compact desktop footprint
Designed and manufactured in the UK
Developed and tested in our own working electronic music studio
Black finish
WHY 30 DEGREES?
The 30-degree angle provides a strong hands-on working position without making the Grind excessively upright.
It places the complete panel within a clearer line of sight while keeping the knobs, sequencer buttons and patch points comfortable to reach.
This position works particularly well when the Grind is placed behind another desktop instrument, MIDI controller or computer keyboard.
PLEASE NOTE
This listing is for the stand only.
The Behringer Grind, Crave, Edge or Spice synthesizer, power supply, patch cables, audio cables and other equipment shown or referred to are not included.
The stand has a fixed 30-degree angle and is not adjustable.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
