SHORT DESCRIPTION
A compact 30-degree desktop stand for the Behringer TD-3, designed to improve pattern programming, knob access and hands-on acid bassline performance.
FULL DESCRIPTION
Bring the Behringer TD-3 into a clearer and more immediate acid bassline performance position with the Studio Solutions S30 desktop stand.
The fixed 30-degree angle raises the complete TD-3 control panel towards the user, improving visibility and access across its oscillator, filter, envelope, accent, slide, distortion and sequencing controls.
This position makes the TD-3 considerably easier to program and manipulate than when it sits completely flat on a studio desk.
Pattern buttons, pitch and time controls, cutoff, resonance, decay and accent can all be reached from a clear and comfortable hands-on position.
The angle works particularly well for live acid performance, where rapid pattern changes and real-time filter adjustments form an important part of the instrument’s character.
The Behringer TD-3 measures approximately 305mm wide and 165mm from front to rear.
The S30 measures 200mm wide, with 175mm running along each angled equipment support.
This allows the complete TD-3 chassis depth to sit within the supports with approximately 10mm of additional length.
When centred, the synthesizer has approximately 52.5mm of normal side overhang on either side.
The result is a compact and well-balanced arrangement that supports the centre of the instrument without surrounding it with a bulky full-width frame.
The connected open-frame construction leaves useful space beneath and behind the TD-3. Power, USB, MIDI, Sync, CV, Gate, audio and headphone cables can remain connected while the synthesizer stays installed and ready to use.
Raised front retaining lips help prevent the TD-3 moving forwards during sequencing and control changes.
Rubber feet beneath the stand protect the desktop and help prevent the frame moving. Anti-slip equipment contact spots are fitted as standard across our open-format stand range.
BUILT FOR ACID PERFORMANCE
The TD-3 combines an analog bass synthesizer with a built-in pattern sequencer and distortion circuit.
Its hands-on interface is designed to be actively manipulated, making the viewing and operating angle particularly important.
The 30-degree position is ideal for:
Acid bassline sequencing
Pattern creation and editing
Live cutoff and resonance control
Accent and slide programming
Real-time distortion adjustment
DAWless performance
MIDI-synchronised hardware setups
Techno, house and electronic music production
Compact live hardware rigs
COMPATIBILITY
Designed and physically tested for:
Behringer TD-3 Analog Bass Line Synthesizer
Suitable for all standard TD-3 colour variations using the same chassis.
Also dimensionally compatible with:
Behringer TD-3-MO Analog Bass Line Synthesizer
The TD-3-MO uses the same stated 305mm × 165mm chassis dimensions.
This product is not intended for the Roland TB-3 or Roland TB-03.
FEATURES
Fixed 30-degree operating angle
200mm overall stand width
175mm angled support length
Complete TD-3 chassis depth supported
Approximately 10mm of spare support length
Physically tested with the Behringer TD-3
Improves pattern and control visibility
Makes filter and envelope controls easier to reach
Excellent for acid sequencing and live performance
Open construction maintains rear connection access
Raised front retaining lips
Rubber desk feet fitted as standard
Anti-slip instrument contact spots fitted as standard
No permanent modification to the TD-3 required
Compact desktop footprint
Designed and manufactured in the UK
Developed and tested in our own working electronic music studio
Black finish
WHY 30 DEGREES?
The 30-degree angle provides a clear view across the TD-3’s complete interface while keeping the sequencer buttons comfortable for active programming.
It creates a more performance-focused position than a subtle low-angle riser without making the instrument excessively upright.
This makes it especially useful for musicians who actively sequence, tweak and perform with the TD-3 rather than controlling it remotely as a sound module.
PLEASE NOTE
This listing is for the stand only.
The Behringer TD-3, TD-3-MO, power adapter, USB cable, MIDI cables, patch cables and other equipment shown or referred to are not included.
SHORT DESCRIPTION
A compact 30-degree desktop stand for the Behringer TD-3, designed to improve pattern programming, knob access and hands-on acid bassline performance.
FULL DESCRIPTION
Bring the Behringer TD-3 into a clearer and more immediate acid bassline performance position with the Studio Solutions S30 desktop stand.
The fixed 30-degree angle raises the complete TD-3 control panel towards the user, improving visibility and access across its oscillator, filter, envelope, accent, slide, distortion and sequencing controls.
This position makes the TD-3 considerably easier to program and manipulate than when it sits completely flat on a studio desk.
Pattern buttons, pitch and time controls, cutoff, resonance, decay and accent can all be reached from a clear and comfortable hands-on position.
The angle works particularly well for live acid performance, where rapid pattern changes and real-time filter adjustments form an important part of the instrument’s character.
The Behringer TD-3 measures approximately 305mm wide and 165mm from front to rear.
The S30 measures 200mm wide, with 175mm running along each angled equipment support.
This allows the complete TD-3 chassis depth to sit within the supports with approximately 10mm of additional length.
When centred, the synthesizer has approximately 52.5mm of normal side overhang on either side.
The result is a compact and well-balanced arrangement that supports the centre of the instrument without surrounding it with a bulky full-width frame.
The connected open-frame construction leaves useful space beneath and behind the TD-3. Power, USB, MIDI, Sync, CV, Gate, audio and headphone cables can remain connected while the synthesizer stays installed and ready to use.
Raised front retaining lips help prevent the TD-3 moving forwards during sequencing and control changes.
Rubber feet beneath the stand protect the desktop and help prevent the frame moving. Anti-slip equipment contact spots are fitted as standard across our open-format stand range.
BUILT FOR ACID PERFORMANCE
The TD-3 combines an analog bass synthesizer with a built-in pattern sequencer and distortion circuit.
Its hands-on interface is designed to be actively manipulated, making the viewing and operating angle particularly important.
The 30-degree position is ideal for:
Acid bassline sequencing
Pattern creation and editing
Live cutoff and resonance control
Accent and slide programming
Real-time distortion adjustment
DAWless performance
MIDI-synchronised hardware setups
Techno, house and electronic music production
Compact live hardware rigs
COMPATIBILITY
Designed and physically tested for:
Behringer TD-3 Analog Bass Line Synthesizer
Suitable for all standard TD-3 colour variations using the same chassis.
Also dimensionally compatible with:
Behringer TD-3-MO Analog Bass Line Synthesizer
The TD-3-MO uses the same stated 305mm × 165mm chassis dimensions.
This product is not intended for the Roland TB-3 or Roland TB-03.
FEATURES
Fixed 30-degree operating angle
200mm overall stand width
175mm angled support length
Complete TD-3 chassis depth supported
Approximately 10mm of spare support length
Physically tested with the Behringer TD-3
Improves pattern and control visibility
Makes filter and envelope controls easier to reach
Excellent for acid sequencing and live performance
Open construction maintains rear connection access
Raised front retaining lips
Rubber desk feet fitted as standard
Anti-slip instrument contact spots fitted as standard
No permanent modification to the TD-3 required
Compact desktop footprint
Designed and manufactured in the UK
Developed and tested in our own working electronic music studio
Black finish
WHY 30 DEGREES?
The 30-degree angle provides a clear view across the TD-3’s complete interface while keeping the sequencer buttons comfortable for active programming.
It creates a more performance-focused position than a subtle low-angle riser without making the instrument excessively upright.
This makes it especially useful for musicians who actively sequence, tweak and perform with the TD-3 rather than controlling it remotely as a sound module.
PLEASE NOTE
This listing is for the stand only.
The Behringer TD-3, TD-3-MO, power adapter, USB cable, MIDI cables, patch cables and other equipment shown or referred to are not included.
