More width. More support. A better studio setup.
The Studio Solutions Extra-Wide XL Desktop Stand is designed for larger synthesizers, keyboards and music production equipment that require a wider, more substantial supporting structure than a conventional compact desktop stand.
Featuring a 632 mm wide reinforced frame, multiple supporting sections and connecting braces, the Wide XL provides a practical solution for positioning larger instruments at a comfortable working angle.
Rather than relying on just two end supports, its wide-frame construction incorporates additional supporting sections across the width, helping distribute the instrument's weight and reduce unwanted movement.
Available in five fixed-angle configurations, from a gentle 15° incline to a steep 60° upright position, the Wide XL can be integrated into a variety of studio layouts.
Reinforced Wide-Frame Construction
Designed for instruments that need more than a basic pair of desktop supports.
The Wide XL incorporates multiple structural support sections connected by full-width rails and braces.
This reinforced arrangement creates an integrated framework that supports equipment across several points rather than relying solely on its outer edges.
The result is a more substantial desktop stand intended for wider synthesizers, keyboards and studio equipment.
Five Angles to Suit Your Workflow
15° — Low-Profile Playing Position
A gentle incline designed for comfortable playing, programming and everyday desktop use.
22.5° — Balanced Studio Position
Provides improved control visibility while maintaining an accessible working angle.
30° — Programming & Production
A versatile elevated arrangement for playing, sound design and accessing front-panel controls.
45° — Elevated Studio Position
A steeper angle for improved visibility and easier access to controls in multi-instrument setups.
60° — Upright Studio Configuration
The most elevated arrangement, intended for compact workstations and studio installations where direct access to the instrument's front panel is a priority.
Open-Frame Studio Design
The Wide XL's open construction provides structural support while leaving clearance around the instrument.
This helps accommodate:
Audio connections
MIDI and USB cables
Power connections
Rear-panel controls
Cable routing
Ventilation
The open underside also makes it easier to integrate the stand into a larger studio workstation.
Front Retaining Supports
Raised retaining lips are incorporated into the front of the supporting sections.
These help prevent instruments from moving forward when positioned at an angle.
For steeper configurations, instrument compatibility and secure retention should be confirmed before use.
Key Features
Extra-wide 632 mm desktop supporting frame
Available in five fixed angles: 15°, 22.5°, 30°, 45° and 60°
Multiple reinforced supporting sections
Full-width connecting rails
Structural cross bracing
Raised front retaining lips
Space-efficient angled positioning
Open-frame construction for cable access
Precision 3D printed using Hyper PLA+
Black finish
Designed and manufactured in the UK by Studio Solutions
Technical Specifications
Product: Extra-Wide XL Desktop Synthesizer & Keyboard Stand
Manufacturer: Studio Solutions
Product Range: Wide XL
Overall Width: 632 mm
Overall Depth: 343 mm
Material: Hyper PLA+
Colour: Black
Available Angles: 15°, 22.5°, 30°, 45° and 60°
Manufacturing Method: Precision 3D Printing
Country of Manufacture: United Kingdom
Dimensions by Angle
15° Stand — WIDEXL15
Overall Width: 632 mm
Overall Depth: 343 mm
Tier Depth: 343 mm
Overall Height: 118 mm
22.5° Stand — WIDEXL22
Overall Width: 632 mm
Overall Depth: 343 mm
Tier Depth: 341 mm
Overall Height: 151 mm
30° Stand — WIDEXL30
Overall Width: 632 mm
Overall Depth: 343 mm
Tier Depth: 339 mm
Overall Height: 202 mm
45° Stand — WIDEXL45
Overall Width: 632 mm
Overall Depth: 343 mm
Tier Depth: 275 mm
Overall Height: 259 mm
60° Stand — WIDEXL60
Overall Width: 632 mm
Overall Depth: 343 mm
Tier Depth: 217 mm
Overall Height: 313 mm
What's Included
1 × Studio Solutions Extra-Wide XL Desktop Stand System in your selected angle, supplied with the required structural components for assembly.
Important Information
This product is designed for larger desktop synthesizers, keyboards and other suitable studio equipment. Please check the dimensions and weight of your instrument before ordering.
The 632 mm measurement refers to the overall width of the stand, not a guaranteed compatible instrument width.
Please ensure your desk is level, stable and capable of supporting the combined weight of the stand and instrument.
This listing is for the stand only. Synthesizers, keyboards, cables and other electronic equipment shown in photographs are not included.
Designed and manufactured by Studio Solutions in our UK studio and workshop.
studio-solutions.com
More width. More support. A better studio setup.
The Studio Solutions Extra-Wide XL Desktop Stand is designed for larger synthesizers, keyboards and music production equipment that require a wider, more substantial supporting structure than a conventional compact desktop stand.
Featuring a 632 mm wide reinforced frame, multiple supporting sections and connecting braces, the Wide XL provides a practical solution for positioning larger instruments at a comfortable working angle.
Rather than relying on just two end supports, its wide-frame construction incorporates additional supporting sections across the width, helping distribute the instrument's weight and reduce unwanted movement.
Available in five fixed-angle configurations, from a gentle 15° incline to a steep 60° upright position, the Wide XL can be integrated into a variety of studio layouts.
Reinforced Wide-Frame Construction
Designed for instruments that need more than a basic pair of desktop supports.
The Wide XL incorporates multiple structural support sections connected by full-width rails and braces.
This reinforced arrangement creates an integrated framework that supports equipment across several points rather than relying solely on its outer edges.
The result is a more substantial desktop stand intended for wider synthesizers, keyboards and studio equipment.
Five Angles to Suit Your Workflow
15° — Low-Profile Playing Position
A gentle incline designed for comfortable playing, programming and everyday desktop use.
22.5° — Balanced Studio Position
Provides improved control visibility while maintaining an accessible working angle.
30° — Programming & Production
A versatile elevated arrangement for playing, sound design and accessing front-panel controls.
45° — Elevated Studio Position
A steeper angle for improved visibility and easier access to controls in multi-instrument setups.
60° — Upright Studio Configuration
The most elevated arrangement, intended for compact workstations and studio installations where direct access to the instrument's front panel is a priority.
Open-Frame Studio Design
The Wide XL's open construction provides structural support while leaving clearance around the instrument.
This helps accommodate:
Audio connections
MIDI and USB cables
Power connections
Rear-panel controls
Cable routing
Ventilation
The open underside also makes it easier to integrate the stand into a larger studio workstation.
Front Retaining Supports
Raised retaining lips are incorporated into the front of the supporting sections.
These help prevent instruments from moving forward when positioned at an angle.
For steeper configurations, instrument compatibility and secure retention should be confirmed before use.
Key Features
Extra-wide 632 mm desktop supporting frame
Available in five fixed angles: 15°, 22.5°, 30°, 45° and 60°
Multiple reinforced supporting sections
Full-width connecting rails
Structural cross bracing
Raised front retaining lips
Space-efficient angled positioning
Open-frame construction for cable access
Precision 3D printed using Hyper PLA+
Black finish
Designed and manufactured in the UK by Studio Solutions
Technical Specifications
Product: Extra-Wide XL Desktop Synthesizer & Keyboard Stand
Manufacturer: Studio Solutions
Product Range: Wide XL
Overall Width: 632 mm
Overall Depth: 343 mm
Material: Hyper PLA+
Colour: Black
Available Angles: 15°, 22.5°, 30°, 45° and 60°
Manufacturing Method: Precision 3D Printing
Country of Manufacture: United Kingdom
Dimensions by Angle
15° Stand — WIDEXL15
Overall Width: 632 mm
Overall Depth: 343 mm
Tier Depth: 343 mm
Overall Height: 118 mm
22.5° Stand — WIDEXL22
Overall Width: 632 mm
Overall Depth: 343 mm
Tier Depth: 341 mm
Overall Height: 151 mm
30° Stand — WIDEXL30
Overall Width: 632 mm
Overall Depth: 343 mm
Tier Depth: 339 mm
Overall Height: 202 mm
45° Stand — WIDEXL45
Overall Width: 632 mm
Overall Depth: 343 mm
Tier Depth: 275 mm
Overall Height: 259 mm
60° Stand — WIDEXL60
Overall Width: 632 mm
Overall Depth: 343 mm
Tier Depth: 217 mm
Overall Height: 313 mm
What's Included
1 × Studio Solutions Extra-Wide XL Desktop Stand System in your selected angle, supplied with the required structural components for assembly.
Important Information
This product is designed for larger desktop synthesizers, keyboards and other suitable studio equipment. Please check the dimensions and weight of your instrument before ordering.
The 632 mm measurement refers to the overall width of the stand, not a guaranteed compatible instrument width.
Please ensure your desk is level, stable and capable of supporting the combined weight of the stand and instrument.
This listing is for the stand only. Synthesizers, keyboards, cables and other electronic equipment shown in photographs are not included.
Designed and manufactured by Studio Solutions in our UK studio and workshop.
studio-solutions.com
Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10