Bring the Korg Electribe 2 into a clearer and more immediate working position with the Studio Solutions S30 desktop stand.
The fixed 30-degree angle raises the Electribe’s display, 16 performance pads, synthesis controls and touch pad towards the user. This makes pattern creation, sound editing and live interaction feel considerably more natural than operating the unit flat on a desktop.
The angle is steep enough to provide a clear view across the complete control panel while remaining lower and more hands-on than a 45 or 60-degree display-oriented stand.
Korg’s Electribe 2 chassis measures approximately 339mm wide and 189mm from front to rear. The S30 provides approximately 170 mm along each angled equipment support, leaving approximately 19 mm of rear overhang when the front of the instrument is located against the retaining lips.
At 200mm wide, the stand supports the central section of the Electribe while remaining compact and unobtrusive beneath the wider instrument.
The connected open-frame construction leaves useful space around the underside and rear of the groovebox. Audio outputs, headphone and audio-input connections, MIDI adapters, USB, sync connections, SD-card access and the power cable can remain accessible while the Electribe stays permanently installed and ready to use.
Raised front lips help prevent the instrument moving forwards during pad playing, sequencing or real-time control changes.
Rubber feet beneath the stand and anti-slip equipment contact spots are fitted as standard across our open-format stand range.
COMPATIBILITY
Designed and tested for the later Korg Electribe 2 music production station, commonly referred to as:
Korg Electribe 2
Korg EMX2
Korg E2
Korg Electribe Music Production Station
Compatible with both the metallic blue and grey versions of the Electribe 2 synth model.
This stand is not designed for the older and substantially larger Korg Electribe MX / EMX-1.
FEATURES
Fixed 30-degree operating angle
200mm overall stand width
approximately 170 mm angled support length
Compatibility tested with the Korg Electribe 2 / EMX2
Improves visibility of the screen and panel markings
Brings the pads, touch pad and controls towards the user
Suitable for sequencing, beat making and live pattern performance
Open construction maintains cable and connection access
Raised front retaining lips
Rubber desk feet fitted as standard
Anti-slip equipment contact spots fitted as standard
No permanent modification to the Electribe required
Compact desktop footprint
Designed and manufactured in the UK
Developed and tested in our own working electronic music studio
Black finish
WHY 30 DEGREES?
The 30-degree angle provides a strong performance position without making the Electribe excessively upright.
It is well suited to musicians who actively play the pads, enter sequencer steps, manipulate the touch pad and adjust sounds in real time.
The position also works particularly well when the Electribe is placed behind another controller, keyboard or desktop instrument.
PLEASE NOTE
This listing is for the stand only.
The Korg Electribe, power supply, audio cables, MIDI adapters, USB cable and other equipment shown are not included.
The stand has a fixed angle and is not adjustable.
Bring the Korg Electribe 2 into a clearer and more immediate working position with the Studio Solutions S30 desktop stand.
The fixed 30-degree angle raises the Electribe’s display, 16 performance pads, synthesis controls and touch pad towards the user. This makes pattern creation, sound editing and live interaction feel considerably more natural than operating the unit flat on a desktop.
The angle is steep enough to provide a clear view across the complete control panel while remaining lower and more hands-on than a 45 or 60-degree display-oriented stand.
Korg’s Electribe 2 chassis measures approximately 339mm wide and 189mm from front to rear. The S30 provides approximately 170 mm along each angled equipment support, leaving approximately 19 mm of rear overhang when the front of the instrument is located against the retaining lips.
At 200mm wide, the stand supports the central section of the Electribe while remaining compact and unobtrusive beneath the wider instrument.
The connected open-frame construction leaves useful space around the underside and rear of the groovebox. Audio outputs, headphone and audio-input connections, MIDI adapters, USB, sync connections, SD-card access and the power cable can remain accessible while the Electribe stays permanently installed and ready to use.
Raised front lips help prevent the instrument moving forwards during pad playing, sequencing or real-time control changes.
Rubber feet beneath the stand and anti-slip equipment contact spots are fitted as standard across our open-format stand range.
COMPATIBILITY
Designed and tested for the later Korg Electribe 2 music production station, commonly referred to as:
Korg Electribe 2
Korg EMX2
Korg E2
Korg Electribe Music Production Station
Compatible with both the metallic blue and grey versions of the Electribe 2 synth model.
This stand is not designed for the older and substantially larger Korg Electribe MX / EMX-1.
FEATURES
Fixed 30-degree operating angle
200mm overall stand width
approximately 170 mm angled support length
Compatibility tested with the Korg Electribe 2 / EMX2
Improves visibility of the screen and panel markings
Brings the pads, touch pad and controls towards the user
Suitable for sequencing, beat making and live pattern performance
Open construction maintains cable and connection access
Raised front retaining lips
Rubber desk feet fitted as standard
Anti-slip equipment contact spots fitted as standard
No permanent modification to the Electribe required
Compact desktop footprint
Designed and manufactured in the UK
Developed and tested in our own working electronic music studio
Black finish
WHY 30 DEGREES?
The 30-degree angle provides a strong performance position without making the Electribe excessively upright.
It is well suited to musicians who actively play the pads, enter sequencer steps, manipulate the touch pad and adjust sounds in real time.
The position also works particularly well when the Electribe is placed behind another controller, keyboard or desktop instrument.
PLEASE NOTE
This listing is for the stand only.
The Korg Electribe, power supply, audio cables, MIDI adapters, USB cable and other equipment shown are not included.
The stand has a fixed angle and is not adjustable.
