Medium 200mm Angled Desktop Stand Wedges – Pair
Support an enormous range of music-production equipment without being restricted by the width of a conventional connected stand.
This medium Studio Solutions wedge set includes two completely independent desktop supports, each providing 200mm of equipment contact at a fixed 22-degree working angle.
Because the wedges are not joined together, they can be placed wherever the supported equipment needs them.
Move them close together beneath a compact groovebox or spread them across the underside of a wide MIDI keyboard, synthesizer module or control surface.
This makes the wedges suitable for equipment far wider than a conventional small desktop stand. The practical limit is determined by the rigidity and weight distribution of the device rather than by a fixed stand width.
The independent arrangement also allows each wedge to be positioned around rubber feet, battery covers, ventilation openings, access panels and uneven sections beneath the equipment.
A 22-degree angle provides a clear improvement in display and control visibility while retaining a comfortable hands-on position for pads, keys, knobs, faders and sequencer buttons.
Each wedge measures 30mm across and is fitted with four rubber desk feet. Across the pair, eight contact points help protect the work surface and resist movement.
Four anti-slip equipment contact dots are fitted along the upper face of each wedge, giving eight spaced support points across the pair.
Raised front retaining lips help prevent compatible equipment moving forwards during programming, performance and control changes.
The open triangular construction leaves the underside of the equipment largely exposed, helping preserve airflow and creating useful room for power, audio, MIDI and USB cables.
FEATURES
Supplied as a matching pair
Fixed 22-degree angle
200mm angled support length
30mm width per wedge
Independent equipment-width positioning
Suitable for compact and extremely wide devices
Position around equipment feet, vents and access panels
Four rubber desk feet per wedge
Eight rubber desk feet across the pair
Four anti-slip equipment dots per wedge
Eight anti-slip equipment contact points across the pair
Raised front retaining lips
Open construction for ventilation and cables
No drilling, clamps or permanent installation
Compact and easy to reposition
Black finish
Designed and manufactured in the UK
Developed in our own working electronic music studio
SUITABLE EQUIPMENT TYPES
Desktop synthesizers
Drum machines
Grooveboxes
Samplers
Hardware sequencers
MIDI keyboards
Pad controllers
DAW controllers
Semi-modular synthesizers
Desktop effects processors
Loop stations
Guitar modelers
Audio interfaces
Compact mixers
Wide synthesizer modules
Other compatible studio and performance equipment
COMPATIBILITY
These are universal positionable supports rather than a fitted model-specific stand.
Equipment can be much wider than the wedges because their spacing is selected by the user.
The supported device must be sufficiently rigid to bridge the gap between the wedges and must rest securely across both upper rails.
Before use, check the underside feet, casing shape, ventilation openings, connection positions and centre of gravity.
Equipment with a depth slightly greater than 200mm may be suitable with a small amount of rear overhang, but this must be assessed for the individual device.
Heavy, flexible or unusually deep equipment should not be used without confirming that it can be safely supported.
For help assessing a particular model, contact us through studio-solutions.com with the equipment name and, where possible, a photograph of its underside.
Support an enormous range of music-production equipment without being restricted by the width of a conventional connected stand.
This medium Studio Solutions wedge set includes two completely independent desktop supports, each providing 200mm of equipment contact at a fixed 22-degree working angle.
Because the wedges are not joined together, they can be placed wherever the supported equipment needs them.
Move them close together beneath a compact groovebox or spread them across the underside of a wide MIDI keyboard, synthesizer module or control surface.
This makes the wedges suitable for equipment far wider than a conventional small desktop stand. The practical limit is determined by the rigidity and weight distribution of the device rather than by a fixed stand width.
The independent arrangement also allows each wedge to be positioned around rubber feet, battery covers, ventilation openings, access panels and uneven sections beneath the equipment.
A 22-degree angle provides a clear improvement in display and control visibility while retaining a comfortable hands-on position for pads, keys, knobs, faders and sequencer buttons.
Each wedge measures 30mm across and is fitted with four rubber desk feet. Across the pair, eight contact points help protect the work surface and resist movement.
Four anti-slip equipment contact dots are fitted along the upper face of each wedge, giving eight spaced support points across the pair.
Raised front retaining lips help prevent compatible equipment moving forwards during programming, performance and control changes.
The open triangular construction leaves the underside of the equipment largely exposed, helping preserve airflow and creating useful room for power, audio, MIDI and USB cables.
FEATURES
Supplied as a matching pair
Fixed 22-degree angle
200mm angled support length
30mm width per wedge
Independent equipment-width positioning
Suitable for compact and extremely wide devices
Position around equipment feet, vents and access panels
Four rubber desk feet per wedge
Eight rubber desk feet across the pair
Four anti-slip equipment dots per wedge
Eight anti-slip equipment contact points across the pair
Raised front retaining lips
Open construction for ventilation and cables
No drilling, clamps or permanent installation
Compact and easy to reposition
Black finish
Designed and manufactured in the UK
Developed in our own working electronic music studio
SUITABLE EQUIPMENT TYPES
Desktop synthesizers
Drum machines
Grooveboxes
Samplers
Hardware sequencers
MIDI keyboards
Pad controllers
DAW controllers
Semi-modular synthesizers
Desktop effects processors
Loop stations
Guitar modelers
Audio interfaces
Compact mixers
Wide synthesizer modules
Other compatible studio and performance equipment
COMPATIBILITY
These are universal positionable supports rather than a fitted model-specific stand.
Equipment can be much wider than the wedges because their spacing is selected by the user.
The supported device must be sufficiently rigid to bridge the gap between the wedges and must rest securely across both upper rails.
Before use, check the underside feet, casing shape, ventilation openings, connection positions and centre of gravity.
Equipment with a depth slightly greater than 200mm may be suitable with a small amount of rear overhang, but this must be assessed for the individual device.
Heavy, flexible or unusually deep equipment should not be used without confirming that it can be safely supported.
For help assessing a particular model, contact us through studio-solutions.com with the equipment name and, where possible, a photograph of its underside.