Moog Semi-Modular Synth & Midi Controller 2-Tier Stand – Mother-32, DFAM, KeyStep Pro

£19.99

Moog Semi-Modular Synth & Controller 2-Tier Stand

Your Moog above. Your controller ready to play.

Bring your Moog semi-modular synthesiser and favourite keyboard controller or sequencer together in a practical two-tier desktop arrangement.

Designed and manufactured by Studio Solutions in our Loughborough workshop, this stand combines a secure, cushioned clip-on fitting for the Moog desktop chassis with a comfortable 15° lower tier for keyboards, sequencers, drum machines and other compatible controllers.

The two independent frames allow you to adjust their positioning around your equipment and connections, giving you more flexibility than a conventional fixed-width stand.

Designed for the Moog semi-modular family

The upper tier is specifically designed around the original Moog 60HP desktop enclosure used by:

  • Moog Mother-32

  • Moog DFAM

  • Moog Subharmonicon

  • Moog Labyrinth

  • Moog Spectravox

Each side frame clips around the Moog's enclosure at both the top and bottom.

Cushioned contact pads protect the instrument's surfaces and help the clips achieve a secure fit, keeping your synthesiser supported above the lower controller.

The raised position keeps the Moog's controls and patch connections accessible while bringing the instrument into a useful working arrangement with your sequencer or keyboard.

A comfortable 15° controller tier

The lower tier is angled at 15°, bringing keyboards, pads and sequencer controls into a comfortable position for playing and programming.

Its 225mm support depth accommodates the Arturia KeyStep Pro, which measures 210mm front to back, with additional room along the support surface for rear connectivity.

The photographs show our stand supporting an Arturia BeatStep Pro beneath a Moog Mother-32.

The lower tier is not restricted to Arturia products. Other keyboards, sequencers, drum machines and desktop controllers can be used where their dimensions and support surfaces are suitable.

Non-slip contact pads help keep the lower instrument in position during use.

Independent frames for flexible positioning

The two side frames work together without fixed connecting braces.

This allows their spacing to be adjusted to suit the equipment being supported, with some flexibility to position the upper clips around the Moog's connections and other features.

It's a particularly useful arrangement if you change controllers, experiment with different sequencing setups or regularly reorganise your desktop instruments.

The Moog's fitted upper support provides the secure connection, while the lower instrument rests on the angled, padded supports.

Specifications

Manufacturer: Studio Solutions
Product type: Two-tier desktop synthesiser and controller stand
Upper tier: Cushioned top-and-bottom clip-on Moog fitting
Upper compatibility: Mother-32, DFAM, Subharmonicon, Labyrinth and Spectravox in their original desktop enclosures
Lower tier: General-purpose angled controller support
Lower tier angle: 15°
Lower support depth: 225mm
Frame footprint depth: Approximately 264mm
Frame height: Approximately 278mm including rubber feet
Configuration: Two independent side frames
Connecting braces: None required
Instrument protection: Cushioned Moog contact pads
Controller support: Non-slip surface pads
Base: Non-slip rubber feet
Colour: Black
Manufactured in: Loughborough, Leicestershire, UK

Supplied as a matched pair of side frames with their protective and non-slip pads.

Synthesiser and controller shown for demonstration purposes only.

Designed and made in our own working studio

Studio Solutions is a family-run British design and manufacturing business, established in 2017 and based in Loughborough, Leicestershire.

Our workshop operates alongside a fully equipped working recording studio containing the synthesisers, drum machines, keyboards and recording equipment that inspire our designs.

We develop products around real instruments, with particular attention to physical fit, playing position, control access and practical studio use.

This Moog and controller stand follows that same approach: a fitted upper support for the instrument, combined with a versatile lower tier for the equipment you choose to control it with.

Studio Solutions — By Musicians, For Musicians.

Moog Semi-Modular Synth & Controller 2-Tier Stand

Your Moog above. Your controller ready to play.

Bring your Moog semi-modular synthesiser and favourite keyboard controller or sequencer together in a practical two-tier desktop arrangement.

Designed and manufactured by Studio Solutions in our Loughborough workshop, this stand combines a secure, cushioned clip-on fitting for the Moog desktop chassis with a comfortable 15° lower tier for keyboards, sequencers, drum machines and other compatible controllers.

The two independent frames allow you to adjust their positioning around your equipment and connections, giving you more flexibility than a conventional fixed-width stand.

Designed for the Moog semi-modular family

The upper tier is specifically designed around the original Moog 60HP desktop enclosure used by:

  • Moog Mother-32

  • Moog DFAM

  • Moog Subharmonicon

  • Moog Labyrinth

  • Moog Spectravox

Each side frame clips around the Moog's enclosure at both the top and bottom.

Cushioned contact pads protect the instrument's surfaces and help the clips achieve a secure fit, keeping your synthesiser supported above the lower controller.

The raised position keeps the Moog's controls and patch connections accessible while bringing the instrument into a useful working arrangement with your sequencer or keyboard.

A comfortable 15° controller tier

The lower tier is angled at 15°, bringing keyboards, pads and sequencer controls into a comfortable position for playing and programming.

Its 225mm support depth accommodates the Arturia KeyStep Pro, which measures 210mm front to back, with additional room along the support surface for rear connectivity.

The photographs show our stand supporting an Arturia BeatStep Pro beneath a Moog Mother-32.

The lower tier is not restricted to Arturia products. Other keyboards, sequencers, drum machines and desktop controllers can be used where their dimensions and support surfaces are suitable.

Non-slip contact pads help keep the lower instrument in position during use.

Independent frames for flexible positioning

The two side frames work together without fixed connecting braces.

This allows their spacing to be adjusted to suit the equipment being supported, with some flexibility to position the upper clips around the Moog's connections and other features.

It's a particularly useful arrangement if you change controllers, experiment with different sequencing setups or regularly reorganise your desktop instruments.

The Moog's fitted upper support provides the secure connection, while the lower instrument rests on the angled, padded supports.

Specifications

Manufacturer: Studio Solutions
Product type: Two-tier desktop synthesiser and controller stand
Upper tier: Cushioned top-and-bottom clip-on Moog fitting
Upper compatibility: Mother-32, DFAM, Subharmonicon, Labyrinth and Spectravox in their original desktop enclosures
Lower tier: General-purpose angled controller support
Lower tier angle: 15°
Lower support depth: 225mm
Frame footprint depth: Approximately 264mm
Frame height: Approximately 278mm including rubber feet
Configuration: Two independent side frames
Connecting braces: None required
Instrument protection: Cushioned Moog contact pads
Controller support: Non-slip surface pads
Base: Non-slip rubber feet
Colour: Black
Manufactured in: Loughborough, Leicestershire, UK

Supplied as a matched pair of side frames with their protective and non-slip pads.

Synthesiser and controller shown for demonstration purposes only.

Designed and made in our own working studio

Studio Solutions is a family-run British design and manufacturing business, established in 2017 and based in Loughborough, Leicestershire.

Our workshop operates alongside a fully equipped working recording studio containing the synthesisers, drum machines, keyboards and recording equipment that inspire our designs.

We develop products around real instruments, with particular attention to physical fit, playing position, control access and practical studio use.

This Moog and controller stand follows that same approach: a fitted upper support for the instrument, combined with a versatile lower tier for the equipment you choose to control it with.

Studio Solutions — By Musicians, For Musicians.