Two-Tier Roland AIRA TR-8, MX-1, SYSTEM-1 + Behringer Hybrid Stand
Combine an original Roland AIRA instrument and a compact Behringer synthesizer or drum machine within one structured, performance-ready desktop workstation.
This version of our hybrid two-tier stand has been specifically configured for the distinctive angular chassis profiles used by the Roland TR-8, MX-1 and SYSTEM-1.
The lower tier incorporates shaped chassis hooks rather than a generic straight retaining edge. These hooks follow the sloping casing profile of the compatible AIRA instrument, creating a close and secure seating position without screws, straps or permanent modification.
Above it, the raised second tier supports compatible instruments from the compact Behringer range, including the Crave, Edge, Spice, Grind, TD-3, RD-6 and RD-78.
This makes it possible to create a wide variety of integrated hardware systems, from a TR-8 and TD-3 acid-performance rig to an MX-1 and Grind hybrid mixing and synthesis station.
Both instruments remain clearly visible and accessible. The lower AIRA control surface stays open for active sequencing, mixing or synthesis, while the raised Behringer tier brings its knobs, sequencer, drum controls or patch points into a clear working position.
Building upwards allows two substantial pieces of equipment to share a far smaller effective desktop footprint than placing them separately across the workspace.
The open-frame construction provides generous access around both instruments. Power, audio, MIDI, USB, sync and patch cables can remain connected while the hardware stays permanently installed and ready to use.
Rubber anti-skid desk feet and soft anti-slip equipment contact spots are fitted as standard.
ANGULAR AIRA LOWER TIER
The lower tier is specifically configured for:
Roland TR-8 Rhythm Performer
Roland MX-1 Mix Performer
Roland SYSTEM-1 Plug-Out Synthesizer
These instruments use distinctive sloping chassis profiles.
The stand’s shaped angular retaining hooks locate around this casing geometry, giving the equipment a more secure and purposeful fit than a universal shelf or straight retaining lip.
This configuration is different from our existing hybrid stand for the Roland TR-8S and MC-707.
BEHRINGER UPPER TIER
The raised upper tier is suitable for compatible compact Behringer instruments, including:
Behringer Crave
Behringer Edge
Behringer Spice
Behringer Grind
Behringer TD-3
Behringer TD-3-MO
Behringer RD-6
Behringer RD-78
FEATURES
Purpose-configured two-tier hybrid design
Angular fitted lower hooks
Designed for Roland TR-8, MX-1 and SYSTEM-1 chassis profiles
Raised upper tier for compatible Behringer instruments
Both equipment interfaces remain visible and accessible
Suitable for sequencing, synthesis, drum programming and performance mixing
Ideal for DAWless and hybrid music-production setups
Open rear construction for cable access
Generous clearance between tiers
Rubber anti-skid desk feet fitted as standard
Soft anti-slip equipment contact spots fitted as standard
No drilling or equipment modification required
Black finish
Designed and manufactured in the UK
Developed and tested in our own working electronic-music studio
Made in our studio workshop using our own production equipment
IDEAL FOR
DAWless performance rigs
Live electronic-music setups
Acid and techno hardware systems
Drum-machine and bassline combinations
Performance mixer and synthesizer setups
Semi-modular patching systems
Hybrid Roland and Behringer studios
Compact hardware command stations
Permanent desktop installations
CONFIGURATION NOTE
This listing is for the angular lower-tier configuration designed for the original Roland TR-8, MX-1 and SYSTEM-1 chassis profiles.
It is not the lower-tier configuration used for the Roland TR-8S or MC-707.
Please select the correct Studio Solutions hybrid stand for the Roland instrument you intend to place on the lower tier.
PLEASE NOTE
This listing is for the stand only.
Roland and Behringer instruments, power supplies, patch cables, audio cables, MIDI cables and other equipment shown or referred to are not included.
Compatibility applies to the models listed. Unrelated equipment may not locate correctly within the shaped retaining hooks.
Combine an original Roland AIRA instrument and a compact Behringer synthesizer or drum machine within one structured, performance-ready desktop workstation.
This version of our hybrid two-tier stand has been specifically configured for the distinctive angular chassis profiles used by the Roland TR-8, MX-1 and SYSTEM-1.
The lower tier incorporates shaped chassis hooks rather than a generic straight retaining edge. These hooks follow the sloping casing profile of the compatible AIRA instrument, creating a close and secure seating position without screws, straps or permanent modification.
Above it, the raised second tier supports compatible instruments from the compact Behringer range, including the Crave, Edge, Spice, Grind, TD-3, RD-6 and RD-78.
This makes it possible to create a wide variety of integrated hardware systems, from a TR-8 and TD-3 acid-performance rig to an MX-1 and Grind hybrid mixing and synthesis station.
Both instruments remain clearly visible and accessible. The lower AIRA control surface stays open for active sequencing, mixing or synthesis, while the raised Behringer tier brings its knobs, sequencer, drum controls or patch points into a clear working position.
Building upwards allows two substantial pieces of equipment to share a far smaller effective desktop footprint than placing them separately across the workspace.
The open-frame construction provides generous access around both instruments. Power, audio, MIDI, USB, sync and patch cables can remain connected while the hardware stays permanently installed and ready to use.
Rubber anti-skid desk feet and soft anti-slip equipment contact spots are fitted as standard.
ANGULAR AIRA LOWER TIER
The lower tier is specifically configured for:
Roland TR-8 Rhythm Performer
Roland MX-1 Mix Performer
Roland SYSTEM-1 Plug-Out Synthesizer
These instruments use distinctive sloping chassis profiles.
The stand’s shaped angular retaining hooks locate around this casing geometry, giving the equipment a more secure and purposeful fit than a universal shelf or straight retaining lip.
This configuration is different from our existing hybrid stand for the Roland TR-8S and MC-707.
BEHRINGER UPPER TIER
The raised upper tier is suitable for compatible compact Behringer instruments, including:
Behringer Crave
Behringer Edge
Behringer Spice
Behringer Grind
Behringer TD-3
Behringer TD-3-MO
Behringer RD-6
Behringer RD-78
FEATURES
Purpose-configured two-tier hybrid design
Angular fitted lower hooks
Designed for Roland TR-8, MX-1 and SYSTEM-1 chassis profiles
Raised upper tier for compatible Behringer instruments
Both equipment interfaces remain visible and accessible
Suitable for sequencing, synthesis, drum programming and performance mixing
Ideal for DAWless and hybrid music-production setups
Open rear construction for cable access
Generous clearance between tiers
Rubber anti-skid desk feet fitted as standard
Soft anti-slip equipment contact spots fitted as standard
No drilling or equipment modification required
Black finish
Designed and manufactured in the UK
Developed and tested in our own working electronic-music studio
Made in our studio workshop using our own production equipment
IDEAL FOR
DAWless performance rigs
Live electronic-music setups
Acid and techno hardware systems
Drum-machine and bassline combinations
Performance mixer and synthesizer setups
Semi-modular patching systems
Hybrid Roland and Behringer studios
Compact hardware command stations
Permanent desktop installations
CONFIGURATION NOTE
This listing is for the angular lower-tier configuration designed for the original Roland TR-8, MX-1 and SYSTEM-1 chassis profiles.
It is not the lower-tier configuration used for the Roland TR-8S or MC-707.
Please select the correct Studio Solutions hybrid stand for the Roland instrument you intend to place on the lower tier.
PLEASE NOTE
This listing is for the stand only.
Roland and Behringer instruments, power supplies, patch cables, audio cables, MIDI cables and other equipment shown or referred to are not included.
Compatibility applies to the models listed. Unrelated equipment may not locate correctly within the shaped retaining hooks.