A proper working position for a serious digital mixing console.
The Yamaha LS9 is a substantial digital mixer, with a large control surface, motorised faders, scene controls and a central display. Finding a practical position for a console of this size can be difficult, especially when working on a studio desk or dedicated mixing workstation.
The Studio Solutions MAX30 Desktop Mixer Stand provides a reinforced 30° supporting frame that raises the console into an angled position, making its control surface easier to view and access.
Rather than relying on a simple pair of loose wedges, the MAX30 uses a connected, open-frame structure with multiple supporting sections and structural bracing.
The result is a more substantial desktop support designed for appropriately sized mixing equipment.
The fixed 30° working angle brings the mixer into a more elevated position, allowing the operator to see the display, channel controls and fader bank more clearly.
This arrangement can be particularly useful when working with:
Studio recording and mixing sessions
Digital console programming and scene management
Channel processing and effects adjustments
Dedicated production workstations
Mixing desks positioned behind other equipment
The angle provides a clear view of the console's operating surface without requiring a separate floor-standing mixer desk.
Built around a connected supporting frame, not independent wedges.
The MAX30 features a series of angled structural supports connected by reinforcing rails and cross sections.
Its triangular framework helps maintain the stand's shape and resist unwanted movement, while distributing support across the frame.
This open construction also avoids unnecessarily enclosing the underside of the console.
A large digital mixing console needs more than a suitable resting position. Its connections, cooling requirements and cable routing must also be considered.
The MAX30's open structure provides clearance around the supported equipment for:
Audio connections
Digital audio connections
MIDI and other control connections where applicable
Power cabling
Cable routing
Rear and underside access
Ventilation
Always check the connection layout and ventilation requirements of your particular mixer before installation.
Raised retaining features at the front of the stand help prevent equipment moving forwards when positioned on the 30° support surface.
These form part of the supporting framework rather than being separate loose accessories.
Studio Solutions MAX30 heavy-duty desktop mixer stand
Fixed 30° working angle
Reinforced triangular supporting sections
Connected structural framework
Supporting rails and bracing
Integrated front retaining lips
Open-frame construction
Improved visibility of mixer controls and display
Designed for appropriately sized mixing consoles
Black finish
Precision 3D printed using Hyper PLA+
Designed and manufactured in the UK
Manufacturer: Studio Solutions
Product: MAX30 Desktop Mixer Stand
SKU: MAX-30
Stand Angle: 30°
Overall Width: 327 mm
Overall Depth: 479 mm
Supporting Depth: 528 mm
Overall Height: 299 mm
Material: Hyper PLA+
Colour: Black
Country of Manufacture: United Kingdom
1 × Studio Solutions MAX30 Desktop Mixer Stand System, comprising the main supporting structure and associated assembly components.
The MAX30 is a general-purpose angled mixer support. Suitability depends on the equipment's dimensions, underside contact points, weight and ventilation requirements.
Please contact Studio Solutions before ordering for a Yamaha LS9 or another substantial digital mixer so that compatibility and the appropriate stand configuration can be confirmed.
Ensure the stand is installed on a firm, level surface capable of supporting the combined weight of the stand and equipment.
Please note: This listing is for the stand only. The Yamaha mixer, cables and other equipment shown in photographs are not included.
Studio Solutions is a family-run studio equipment design and manufacturing business based in Loughborough, Leicestershire.
We develop stands and accessories for synthesizers, mixers, drum machines and other production equipment, paying attention to how the equipment is positioned, accessed and supported.
Our approach is to build practical products that address the challenges of working with real music equipment.
A better working position, without unnecessary complication.
Designed and manufactured by Studio Solutions in the UK.
A proper working position for a serious digital mixing console.
The Yamaha LS9 is a substantial digital mixer, with a large control surface, motorised faders, scene controls and a central display. Finding a practical position for a console of this size can be difficult, especially when working on a studio desk or dedicated mixing workstation.
The Studio Solutions MAX30 Desktop Mixer Stand provides a reinforced 30° supporting frame that raises the console into an angled position, making its control surface easier to view and access.
Rather than relying on a simple pair of loose wedges, the MAX30 uses a connected, open-frame structure with multiple supporting sections and structural bracing.
The result is a more substantial desktop support designed for appropriately sized mixing equipment.
The fixed 30° working angle brings the mixer into a more elevated position, allowing the operator to see the display, channel controls and fader bank more clearly.
This arrangement can be particularly useful when working with:
Studio recording and mixing sessions
Digital console programming and scene management
Channel processing and effects adjustments
Dedicated production workstations
Mixing desks positioned behind other equipment
The angle provides a clear view of the console's operating surface without requiring a separate floor-standing mixer desk.
Built around a connected supporting frame, not independent wedges.
The MAX30 features a series of angled structural supports connected by reinforcing rails and cross sections.
Its triangular framework helps maintain the stand's shape and resist unwanted movement, while distributing support across the frame.
This open construction also avoids unnecessarily enclosing the underside of the console.
A large digital mixing console needs more than a suitable resting position. Its connections, cooling requirements and cable routing must also be considered.
The MAX30's open structure provides clearance around the supported equipment for:
Audio connections
Digital audio connections
MIDI and other control connections where applicable
Power cabling
Cable routing
Rear and underside access
Ventilation
Always check the connection layout and ventilation requirements of your particular mixer before installation.
Raised retaining features at the front of the stand help prevent equipment moving forwards when positioned on the 30° support surface.
These form part of the supporting framework rather than being separate loose accessories.
Studio Solutions MAX30 heavy-duty desktop mixer stand
Fixed 30° working angle
Reinforced triangular supporting sections
Connected structural framework
Supporting rails and bracing
Integrated front retaining lips
Open-frame construction
Improved visibility of mixer controls and display
Designed for appropriately sized mixing consoles
Black finish
Precision 3D printed using Hyper PLA+
Designed and manufactured in the UK
Manufacturer: Studio Solutions
Product: MAX30 Desktop Mixer Stand
SKU: MAX-30
Stand Angle: 30°
Overall Width: 327 mm
Overall Depth: 479 mm
Supporting Depth: 528 mm
Overall Height: 299 mm
Material: Hyper PLA+
Colour: Black
Country of Manufacture: United Kingdom
1 × Studio Solutions MAX30 Desktop Mixer Stand System, comprising the main supporting structure and associated assembly components.
The MAX30 is a general-purpose angled mixer support. Suitability depends on the equipment's dimensions, underside contact points, weight and ventilation requirements.
Please contact Studio Solutions before ordering for a Yamaha LS9 or another substantial digital mixer so that compatibility and the appropriate stand configuration can be confirmed.
Ensure the stand is installed on a firm, level surface capable of supporting the combined weight of the stand and equipment.
Please note: This listing is for the stand only. The Yamaha mixer, cables and other equipment shown in photographs are not included.
Studio Solutions is a family-run studio equipment design and manufacturing business based in Loughborough, Leicestershire.
We develop stands and accessories for synthesizers, mixers, drum machines and other production equipment, paying attention to how the equipment is positioned, accessed and supported.
Our approach is to build practical products that address the challenges of working with real music equipment.
A better working position, without unnecessary complication.
Designed and manufactured by Studio Solutions in the UK.
